Georgia Bermudagrass Lawn Calendar
Bermudagrass thrives in hot weather, spreads by both stolons and rhizomes, and is adapted to the entire state of Georgia, though it typically performs poorly in shade.[4] This calendar puts UGA Extension's Bermudagrass Lawn Calendar into a month-by-month plan, with UGA's north and south Georgia dates and the soil-temperature cues it uses for fertilizer and weed control.[1][2][3]
North vs. south Georgia. Georgia ZIP codes run from USDA hardiness zone 7b to 9a on the 2023 map.[6] UGA says location and weather within the state can shift its turf calendar by as much as four weeks.[2] In practice, that means south Georgia's spring pre-emergent window opens about two weeks earlier than north Georgia's, while its fall window comes later.[2][3] Spring dead spot is most damaging in north Georgia, especially the Piedmont,[5] and pest mole crickets live mainly in the sandy soils of the Coastal Plain.[2]
Month-by-month bermudagrass calendar for Georgia
UGA's Bermudagrass Lawn Calendar rates each month as a best, possible or marginal time for each task.[1] We've turned those ratings into rows and added the specific dates and soil-temperature cues from UGA's turf management and weed control publications.[2][3] Where two UGA publications give slightly different dates, both are shown.
| Month | Mowing | What to do |
|---|---|---|
| January | Not a mowing month on UGA's calendar | Lime (dolomitic, by soil test): a best month. Spot-spray broadleaf weeds as needed. Atrazine or simazine can go on warm-season lawns November through February for annual bluegrass and some winter broadleaf weeds; UGA's homeowner schedule limits atrazine to dormant bermudagrass. Sodding is marginal; keep any new sod moist.[1][2][3] |
| February | Not a mowing month on UGA's calendar | Spring pre-emergent, south Georgia: February 15 to mid-March, before soil reaches 55 °F (a best month on the calendar). Repeat wild garlic treatments from late fall for better control. Lime is still in a best month. No nitrogen yet.[1][2][3] |
| March | Not a mowing month on UGA's calendar | Spring pre-emergent, north Georgia: March 1–20. Avoid postemergence herbicides during spring green-up. Don't fertilize until the 4-inch soil temperature is constantly 65 °F and rising.[1][2][3] |
| April | Common 1–2 in.; hybrid 1–1½ in. | Mowing season starts. Possible month for first fertilizer (once the 65 °F soil cue is met), core aeration, seeding and sodding. Spring pre-emergent is only a “possible” month now. Broadleaf herbicides for actively growing weeds, April to July. Coastal Plain: southern mole cricket flights in April and early May.[1][2][3] |
| May | Common 1–2 in.; hybrid 1–1½ in. | Fertilize (best month) by soil test. Best month for core aeration, seeding and sodding. Grassy weed postemergence (crabgrass, dallisgrass) and nutsedge control season begins, but not on drought-stressed turf. Where billbugs have been a problem, UGA times an insecticide for mid- to late May.[1][2][3] |
| June | Common 1–2 in.; hybrid 1–1½ in.; raise ½ in. in hot weather | Fertilize, aerate, seed or sod (all best months). Dethatch if thatch is over ½ inch (best month). Water about 1 inch a week if it doesn't rain. Billbug damage peaks June–July. Coastal Plain: late June to early July is the most effective time for mole cricket insecticides.[1][2] |
| July | Common 1–2 in.; hybrid 1–1½ in.; raise ½ in. in hot weather | Fertilize, dethatch, aerate, seed or sod (all best months). White grubs: UGA recommends July–August applications of the newer products, while grubs are small and near the surface. Postemergence control of grassy weeds and nutsedge continues.[1][2][3] |
| August | Common 1–2 in.; hybrid 1–1½ in. | Last best month for fertilizer, aeration and sodding; seeding and dethatching drop to “possible.” North Georgia: UGA's homeowner bulletin opens the fall pre-emergent window on August 15.[1][3] |
| September | Common 1–2 in.; hybrid 1–1½ in. | Winter pre-emergent (best month) for annual bluegrass, henbit and chickweed: north Georgia by September 15; south Georgia September 1–15 or October 1–15, depending on the UGA publication. Skip it if you plan to overseed. Where spring dead spot is a problem, apply no more than ½ lb N per 1,000 sq ft after mid-September, and consider fall potassium by soil test.[1][2][3][5] |
| October | Last mowing month on UGA's calendar | Overseeding with ryegrass (best month), 5–10 lb seed per 1,000 sq ft, about 2–4 weeks before the first 32 °F night. Winter pre-emergent is still a “possible” month. Spring dead spot fungicides go on in fall when soil is 60–80 °F.[1][2][5] |
| November | Not a mowing month on UGA's calendar | Lime (best month). Overseeding is still possible. Wild garlic and winter broadleaf weeds: broadleaf herbicide in late November or December when temperatures are above 50 °F. Atrazine on dormant bermudagrass from November. Keep any newly laid sod moist.[1][3] |
| December | Not a mowing month on UGA's calendar | Lime (best month). Finish late-fall broadleaf and wild garlic treatments on days above 50 °F. Spot-spray broadleaf weeds as needed.[1][3] |
Mowing bermudagrass in Georgia
UGA's calendar sets the mowing height at 1 to 2 inches for common bermudagrass and 1 to 1½ inches for hybrid bermudagrass, raised ½ inch in hot weather. Mowing runs April through October on the calendar.[1]
- One-third rule: remove no more than ⅓ (about 30%) of the leaf surface at a mowing. If you cut at 2 inches, mow when the grass reaches 3 inches.[2]
- Leave the clippings. UGA says clippings don't contribute to thatch under proper management, and recycling them can cut fertilizer needs by 30 percent.[2]
- Stress: raising the mowing height during periods of stress generally helps maintain turf vigor.[2]
- Seedheads: all bermudagrasses can produce seedheads, and common types tend to produce more than hybrids. TifGrand is a prolific seedhead producer and needs regular mowing, especially in spring.[4]
Fertilizer, lime and soil testing
UGA recommends 2 to 5 pounds of nitrogen per 1,000 square feet per year for bermudagrass lawns. Follow your soil test report. If the soil wasn't tested, use any turf fertilizer at label rates.[1] Generally, turfgrasses need ½ to 1 pound of nitrogen per 1,000 sq ft per month during active growth. Excess nitrogen means more mowing, higher water needs, more thatch and possibly more insect and disease problems.[2]
- When to start: don't apply nitrogen in spring until the soil temperature at a 4-inch depth is constantly 65 °F and rising.[1] UGA's weed bulletin applies the same 65 °F cue to weed-and-feed products that contain nitrogen.[3]
- Best months: May through August, with April and September as possible months.[1]
- Late season: high nitrogen can reduce bermudagrass winter hardiness. UGA's spring dead spot circular recommends no more than ½ lb N per 1,000 sq ft after mid-September.[5]
- TifGrand lawns can get one-third less nitrogen than other bermudagrass cultivars, because the dark color is built in.[4]
Soil pH and lime: bermudagrass tolerates a wide pH range, but 5.5 to 6.5 is ideal.[4] UGA's calendar calls for dolomitic lime per soil test recommendation. It can go on at any time, and November through March are the best months.[1] On lawns with spring dead spot, UGA suggests keeping pH at 5.8 to 6.2.[5] Your UGA county Extension office can tell you how to submit a soil sample.
How much product is 1 lb of nitrogen? Divide the pounds of nitrogen you want by the first number on the bag, as a decimal. With a 16-4-8 fertilizer, 1 ÷ 0.16 ≈ 6.25 lb of product per 1,000 sq ft. Four monthly applications of 1 lb N from May through August add up to 4 lb N for the year, inside UGA's 2–5 lb range and its ½–1 lb per month guideline.[1][2]
Weed control by date and soil temperature
UGA calls preemergence herbicides the backbone of lawn weed control. They work during germination, so once you see the weeds it's too late for a pre-emergent.[3] Established lawns get two pre-emergent windows a year:
- Spring (crabgrass, goosegrass, sandbur): apply before soil temperatures reach 55 °F. UGA's homeowner bulletin gives March 1–20 in north Georgia and February 15 to March 15 in south Georgia.[3] UGA's turf recommendations give the same north Georgia dates and February 15 to March 5 for south Georgia, noting that 55 °F is the temperature at which crabgrass germinates.[2]
- Fall (annual bluegrass, henbit, common chickweed): apply when nights drop to 65–70 °F. The homeowner bulletin's dates are August 15 to September 15 in north Georgia and September 1–15 in south Georgia.[3] UGA's turf recommendations list September 1–15 for north Georgia and October 1–15 for south Georgia.[2] Don't use a fall pre-emergent on a lawn you plan to overseed.[3]
Postemergence: treat small, actively growing weeds at air temperatures between 60 and 90 °F. Turf stressed by heat or drought is more easily injured, and weed control is usually poor. Avoid postemergence herbicides during spring green-up.[2][3] For bermudagrass, UGA's schedule lists:
- April to July: broadleaf weeds, with combinations of 2,4-D, MCPP and dicamba.[3]
- May to July: escaped grassy weeds (crabgrass, goosegrass, dallisgrass, bahiagrass) and nutsedge. For nutsedge, UGA names imazaquin, bentazon and sulfosulfuron, and adds that foramsulfuron, quinclorac and trifloxysulfuron may also be applied to bermudagrass.[3]
- November to mid-February: atrazine on dormant bermudagrass for annual bluegrass, henbit and hop clovers. Don't apply it over the root zone of ornamentals.[3]
- Late November or December: 2,4-D-based broadleaf mixes for wild garlic and winter broadleaf weeds when temperatures are above 50 °F, repeated in February for better wild garlic control.[3]
Pre-emergents are recommended only for turf established at least one year. They can severely injure newly seeded, sprigged or sodded bermudagrass.[3] See our soil temperature timing chart for every cue in one place.
Checking the 4-inch soil temperature: UGA points to the Georgia Weather Network (georgiaweather.net) for local conditions.[5] To measure your own yard, you need a probe-style soil thermometer. One example is the Luster Leaf 1625 Digital Soil Thermometer (Amazon). We haven't tested it. Check the probe length and reviews before you buy.
Watering
UGA's calendar calls for 1 inch of water per week if there's no rainfall. Newly planted sod or seed gets 30 days of establishment watering, and sod laid in fall or winter should be kept moist.[1]
- Wait for stress signs, such as a bluish-gray color, before irrigating.[2]
- Water deeply: wet the soil to a 6- to 8-inch depth. On clay soils, multiple start times help prevent runoff. On sandy soils, two ½-inch applications are better.[2]
- Timing: the most efficient time is after sunset and before sunrise. Under Georgia's Water Stewardship Act of 2010, outdoor irrigation can occur between 4 p.m. and 10 a.m. Your local water provider may add restrictions.[2]
Common and hybrid bermudagrass both have excellent drought resistance in UGA's rating table.[4]
Aeration and thatch
Core aeration belongs in the active growing season: May through August are the best months, April and September possible.[1] Coring is the best way to relieve compaction. Hollow or spoon tines should pull plugs 2 to 3 inches deep and ½ to ¾ inch wide, and a fertilizer application 10 to 14 days before coring speeds recovery.[2]
Dethatch when thatch exceeds ½ inch. UGA's calendar calls for a vertical mower with blades 1 inch apart, run over the lawn in two directions; June and July are the best months. Topdressing with ¼ inch of soil can also be effective.[1] Vertical mow while the turf is actively growing and at least 30 days before the first killing frost. Avoid it during heat or drought stress, during weed seed germination, or after a pre-emergent has gone down.[2]
Diseases and insects to watch
UGA's first step for any pest is to identify it, then decide whether cultural changes or a pesticide fits, confirm the grass tolerates the product, and apply it according to the label.[2]
- Spring dead spot is a persistent, destructive bermudagrass disease, most damaging in north Georgia and the Piedmont. Circular patches of bleached, dead grass show up at green-up. Infection begins when soil drops below 70 °F, typically late September or early October. Management: limit late-season nitrogen, apply fall potassium by soil test, keep pH at 5.8–6.2, relieve compaction and thatch, and, where it's a chronic problem, apply a fall fungicide when soil is 60–80 °F (a second one 4–6 weeks later under high pressure). UGA says acceptable control typically takes two to four years.[5]
- Armyworms occur throughout Georgia, with three to six generations a year. Populations tend to build after drought. Keep soil moisture consistent, and time insecticides for early evening when caterpillars feed.[2]
- Billbugs injure bermudagrass and zoysia most often, with the most damage in June and July. UGA suggests an insecticide in mid- to late May, repeated in June, where they're a problem.[2]
- Mole crickets (tawny and southern) occur mainly in Coastal Plain sandy soils. Tawny flights are in March and early April, southern in April and early May. Insecticides work best in late June or early July while nymphs are small.[2]
- Sod webworms: check with UGA's irritation test (1 ounce of dish detergent in 1 gallon of water poured over 1 square yard). About 15 or more larvae per square yard is a rough treatment guide.[2]
- White grubs: target small grubs with July–August applications. Later, dig square-foot samples. Control may be needed at 5–10 grubs per square foot in non-irrigated turf, or more than 20 in irrigated, highly maintained turf.[2]
Planting and overseeding
UGA says the best time to plant warm-season grasses is late spring or early summer, once the 4-inch soil temperature is consistently above 65 °F.[2]
- Seed (common and seeded types): 4–8 lb unhulled or 1–2 lb hulled seed per 1,000 sq ft. Best months May–July; April and August possible.[1]
- Sod: best May–August, possible in April and September, marginal October through March. A pallet typically covers 500 sq ft.[1]
- Hybrids produce sterile seed, so they must be planted as sod, sprigs or plugs.[4]
- Renovation usually works if at least 50% of the area is desirable grass; renovate at the start of the growing season.[2]
Overseeding for winter color: bermudagrass tolerates overseeding better than other warm-season grasses. UGA's calendar uses 5–10 lb of ryegrass seed per 1,000 sq ft, with October the best month and September and November possible.[1][2] Timing cues include a 4-inch soil temperature approaching 75 °F, nights consistently in the 50s, midday temperatures below 70 °F, or 2–4 weeks before the average first killing frost. The trade-off: overseeded lawns can have weaker bermudagrass stands and a delayed spring green-up.[2]
Bermudagrass cultivars in Georgia
UGA's selection bulletin describes these options for Georgia lawns:[4]
| Cultivar / type | Planted as | What UGA says |
|---|---|---|
| Tifway (419) | Sod, sprigs, plugs | Released from the Georgia Coastal Plain Experiment Station in 1960. Green color, fine texture, dense canopy, few pest problems. Buy Georgia Crop Improvement “blue tag” certified sod for varietal purity.[4] |
| TifTuf | Sod, sprigs, plugs | Better drought tolerance than Tifway; UGA studies show it uses about one-third less water. Relatively good shade persistence for a bermudagrass. Lighter green color.[4] |
| TifGrand | Sod, sprigs, plugs | Darker green, finer texture; can get one-third less nitrogen and can be mowed lower. Heavy spring seedheads.[4] |
| Celebration | Sod, sprigs, plugs (no seed sold) | Genetically a common bermudagrass with a blue-green color and fast growth. Kept acceptable quality down to 5.5 hours of filtered sun in UGA shade trials.[4] |
| Seeded types | Seed | Newer: Arden 15, Monaco, Rio. Others that performed well in Georgia studies: Riviera, Southern Star, Majestic, Savannah, Jackpot. Better than Arizona Common but below vegetative hybrids in quality.[4] |
All bermudagrasses perform best with 8 or more hours of sun a day.[4] If spring dead spot is chronic, note that the primary cultivars grown in Georgia have shown susceptibility to it. Cultivars with more cold tolerance generally have less spring dead spot, and converting to a tolerant cultivar is an option. UGA's example is Patriot, which may still get the disease but not as severely.[5]
Your zone: look up your 2023 USDA hardiness zone with our zone & grass lookup. Have a different warm-season grass? See the Tennessee zoysia and Texas St. Augustine calendars, or browse all lawn calendars.
Sources
- University of Georgia Cooperative Extension, GeorgiaTurf. Bermudagrass Lawn Calendar (September 2023; part of Bulletin 984, 2024).
- University of Georgia Cooperative Extension. B 984, 2024 Turfgrass Pest Control Recommendations for Professionals (reviewed October 2024), including “Basic Turfgrass Management for Georgia” (Waltz, C.) and “Insect Pests of Turfgrass” (Braman, K. and Hudson, W.).
- Waltz, C. and McCullough, P.E. University of Georgia Cooperative Extension. B 978, Weed Control in Home Lawns (full review July 17, 2024).
- Waltz, C. University of Georgia Cooperative Extension. B 1533-1, Lawns in Georgia: Selection and Species (December 8, 2020).
- Martinez, A. and Waltz, C. University of Georgia Cooperative Extension. C 1012, Identification and Control of Spring Dead Spot in Georgia (full review June 21, 2022).
- USDA Agricultural Research Service and Oregon State University PRISM Group. 2023 USDA Plant Hardiness Zone Map and ZIP code zone listing.